TP Link RE700X Setup

You must choose TP Link RE700X Setup if you want to achieve lightning-fast internet and eliminate dead spots in every area of your home or office. A dual band wifi range extender called the RE700X gives you a fast wifi connection by providing speeds of up to 1200 Mbps.

There are only really two ways to set up a TP Link RE700X  extender:

• Manual Setup (Web Browser Setup).
• WPS Setup (WIreless Protected Setup).

TP Link RE700X  Extender Setup By Manual Method 

Follow these instructions for the TP Link RE700X Setup:

• Turn on your TP Link RE700X.
• Place your RE700X next to the router.
• Watch for the TP Link RE700X power light to turn completely green.
• Go to the Wireless options on your smartphone.
• Connect to the extender network, then go to tplinkrepeater.net.
• Then the screen will now show New Extender Setup.
• Follow the instructions to finish the setup procedure.
• Take your booster outside, and plug it in where there are dead areas.
• Now join the additional network with your other devices.

By following these easy steps, we may set up the TP Link RE700X in that manner.

Another way to set up a Netgear extender, known as the Wireless protected setup, will be covered in the following blog (WPS).

How to Connect TP Link RE700X extender with WPS?

One of the quickest and simplest ways to configure your TP LInk RE700X is through wireless protected setup. Your extender will just take you two to three minutes to set up. You must click the WPS button on both the router and the booster in order with the TP LInk RE700X Setup using WPS.

Follow the steps below to proceed with the process:

• The TP Link RE700X should be unwrapped and turned on.
• Put your RE700X close to the router.
• The power LED will turn completely green.
• Press the WPS button on your TP Link RE700X.
• Press the WPS button on the router also.

NOTE: If your router supports the 5 GHz band, your extender will make an attempt to connect to it the first time you press the WPS button. During installation, a number of issues could arise if your extender cannot initially connect to the router’s 5 GHz band.

Your extender has been configured correctly if the LEDs on the extender turn solid green.

Connect your smart gadgets to the booster and move it to a new area that has dead zones.

We can quickly do the TP Link RE700X Setup with this method.

TP Link RE700X Extender Firmware Update

The most recent security updates and new features are included in the firmware update for the TP Link RE700X WiFi extender.It tends to enhance the RE700X performance while also assisting in the removal of bugs and any other issues you could encounter when utilizing the TP Link RE700. You will need to grab a smart device and head over to tplinkrepeater.net, TP Link official website, to upgrade the firmware.

To upgrade the firmware on your TP Link RE700X, follow these steps:

• Firstly, turn on your TP Link RE700X.
• Connect to your wireless network of choice.
• Go to tplinkrepeater.net in your browser.
• To log into your extender, fill out your unique details.
• Go to the settings menu and select firmware upgrade.
• During the update procedure, do not disconnect your RE700X.

You can update to the newest firmware version by following the instructions above.

TP Link RE700X Reset Instructions

• Unbox your TP Link RE700X and turn it on.
• On the side panel of your RE700X, look behind a small hole to find the WPS button.
• Take a pin, then for 8 to 9 seconds, press the reset button.
• After a short period of time, remove the pin.
• As soon as the TP Link RE700X LED status changes to a steady green.
• Which indicates that the reset of your extender was successful, and it is now prepared for the fresh installation procedure.

You can reset your TP Link RE700X in this manner and get your login and password back. Call us at our toll-free hotline if you need assistance with TP Link RE700X setup, firmware updates, or reset operations. You will receive assistance from our experts in resolving your issue.