It’s difficult to beat ceramic tile in terms of elegance, flexibility and durability. It’s ideal for kitchen, bathroom or even entryway floors, as well as for countertops and backsplashes, ceramic tile is typically easy to clean but it requires some maintenance. Follow these tips for cleaning ceramic tiles and make sure that your tile remains in good condition for the long haul. Tile floors can be tough and easy to keep clean however grit and sand are their main drawbacks. If they are not cleaned, they could scratch the floor. If you do not take care to clean your tile floors then they could end up with permanent damage. Additionally, tile that is dirty could make a clean space appear dirty, especially since the grout gets darker in time when it absorbs dust.
How to Clean Ceramic Tile Floors
Stave away scratches
While it’s a material that’s fairly durable ceramic tile made from naturally-occurring clays, sand and water, and then baked in a kiln – can get scratched. Regularly cleaning or vacuuming (using a soft-head attachment) will prevent dirt and other debris from damaging the tile and getting to the tile. If you have ceramic tiles in the entryway, you can place mats on the outside as well as inside. Encourage your family to clean their feet.
Seal the seams
Grout is a substance that is applied to tiles to help them stay in place to keep out water and give them a polished appearance. However, it is a porous product and is usually light or white and therefore prone to becoming stained. The best way to avoid this would be the need to apply a sealer to the grout after tile is installed, and then once or every year thereafter. There are many simple-to-apply grout sealers that are available from your nearby hardware store or your local home-based store.
Wash tiles regularly
After vacuuming or sweeping clean ceramic tile floors at least every other week with a little mild dishwashing detergent mixed with hot water. There is no need to use stronger detergents however if you do want to do so, test your preferred cleanser in a safe area (like behind the appliance) to make sure it doesn’t cause harm to the finish. You can also clean textured ceramic floor tile by the same processes.
Don’t use a sponge that pushes dirt away from tiles and then into grout. Make use of a strip or string mop heads instead. Refill water as soon as it starts to get dirty otherwise, you’ll see clouds, dull outcomes.
Make sure spills are cleaned up promptly
Everyday mess like spilled milk and muddy tracks must be cleaned immediately after you see them, or tiles may stain. Just dampen a clean cloth or mop using warm water, and add a touch of mild dish detergent, and sweep it away.
Avoid accidents
Ceramic tiles are prone to becoming slippery when wet. Therefore, dry the tile thoroughly using an untidy towel or keep it out of the area until it dries completely to prevent slips.
Get rid of grime from grout
If grout requires cleaning it is usually a thorough scrub using a stiff brush, hot water and a stiff should accomplish the task. For more difficult tasks, you’ll need the use of a baking soda and vinegar paste or hydrogen peroxide solution. Allow some time to dwell before brushing and then washing. The most stubborn stains might require bleach, or even steam cleaning.
How to Clean Ceramic Tile Grout
Ceramic tile floors only look good in the grout which holds them together. Homeowners can rent grout cleaning machines from hardware stores that utilize steam heated to deeply clean grout. If you’re looking to do to do it yourself, you can follow these steps: DIY technique the best method to cleanse grout can be listed below:
- Mix the water in a bucket using powdered oxygen bleach in accordance with the instructions in the label. This bleach is effective and comes with a different chemical compound unlike chlorine bleach. It is safe for color and non-toxic. You will usually find it in the aisle for cleaning at any hardware or grocery retailer.
- Apply the solution to grout lines using either spray bottles or a scrub brush. If the grout is particularly filthy, we recommend that you apply both methods.
- Allow the solution to sit in the grout at most 30 minutes. The longer you are waiting longer, the more effective. The oxygen ions contained in the bleach solution work for up to six hours.
- After you have the bleach mixture soaked into it, use a tough bristle or an older one to clean of the lines in grout. Rub a small section of grout one at a time and then blot up the dirty water using a clean towel while you work.
- When all grout lines have been cleaned Clean the grout with water that is fresh, then dry it using a clean, dry cloth.
- After you’ve finished and your floors are dry apply grout sealants for keeping the grout spotless.
It is possible to make a substitute for the oxygen bleach using an equal amount of white vinegar and baking soda or lemon juice which you may already have at hand. Based on our experience bleach requires the most minimal amount of scrubbing, in order to be the most effective in getting rid of staining.
